Skip to content

Status

Page presenting data read from the device, such as the state of outputs, PWM outputs, analog inputs, digital inputs, sensor readings and proper names for all of the listed fields.

The user can choose which fields to display, by setting it on the Outputs, PWM and PID, Inputs and Power and Energy pages.

Status

Elements of page

  1. Information about the firmware and hardware version (visible on every page after logging in). A green padlock is visible when using https.
  2. Link to the Settings and logout page (visible on every page after logging in).
  3. Information panel.

    • time since the last restart (Uptime)
    • date and time of the device
    • firmware and hardware version
    • power supply voltage
    • processor temperature

    Option confirmation that the device was on or after restart

    The function is available since version 1.48 of the firmware of LC3.0 and all LC3.5+

    After turning on the LC3 or its restart, the Uptime field has a red background. If you click on this field, it will change to orange and remain like that until the device is restarted.

    Thanks to this you can check whether in the meantime the device has been restarted or lost power, without having to remember the value of Uptime - just see when visiting the site if the color of the backlight has changed.

  4. Outputs ON/OFF.

    It contains a field with an editable name and a state change button that also shows the current state.

  5. PWM outputs.

    It contains a field with an editable name, a state change button, and a slider to change the fill factor.

  6. Analog inputs.

    It contains a field with an editable name and a converted value from the selected sensor (eg current value in A).

  7. Temperature (DS18B20), humidity (AM2320) and pressure (BME280/HTS221) measurements.

    It contains a field with an editable name and a field with a reading.

    Selection of active sensors in the I2C and 1Wire sensors tab.

  8. Other measurements (CO2 and PM).

    It contains a field with an editable name and a field with a reading.

    Selection of active CO2 sensor MH-Z16/19, PM SDS011, PM SPS30 in the tab Serial port. In the case of SPS30 it is possible to connect via I2C - configuration in I2C and 1Wire sensors.

  9. Differential measurements.

    Displays the difference or sum of two selected measurements (readings of analog inputs, temperatures, power, energy). Configurable in the Inputs tab.

  10. Digital inputs.

    It contains a field with an editable name and a field with a logical state.

  11. Power and energy readings.

    It contains a field with an editable name and fields with power and energy readings.

Editable names

When setting the names of inputs, outputs or readings, ONLY following characters are allowed: a-z, A-Z, 0-9, and _ (floor) without nationality signs.


Last update: 2021-02-11
Back to top